Powerex Medical Packing System MPQ User Manual download pdf (Page 8)

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-

erty damage! Retain instructions for future reference.

Powerex • 150 Production Drive • Harrison, OH 45030 • USA

Descriptions

GENERAL

Powerex utilizes cutting-edge compres-

sor technology to provide the most

advanced oilless reciprocating air com-

pressor in the industry. The Powerex reci-

procating compressor is available in sin-

gle and two stage models. Continuously

lubricated, sealed bearings provide oil-

free compressed air and long compressor

life. The onboard fan, finned flywheel

and temperature reducing composite

piston create lower operating tempera-

tures.

DRY TYPE INLET FILTER

The inlet filter on the oilless compressor

assures 99% of particulate free air, down

to 10 micron, is admitted to the unit.

Change every 2500 hours or more often

in dirty locations (See Figure 5).

PISTON AND PISTON RINGS

The Powerex oilless reciprocating com-

pressor pistons are made of a high-

strength, self-lubricating composite

using the most advanced technology

available. These heat reducing pistons

eliminate the effect of excessive grease

leakage at the wrist pin bearing.

Oilless Oilless Reciprocating Air Compressor Pumps

Breathable Air Warning

This compressor/pump is NOT

equipped and should NOT be used

“as is” to supply breathing quality

air. For any application of air for

human consumption, you must fit

the compressor/pump with suitable

in-line safety and alarm equipment.

This additional equipment is neces-

sary to properly filter and purify

the air to meet minimal specifica-

tions for Grade D breathing as

described in Compressed Gas

Association Commodity

Specification G 7.1 - 1966, OSHA 29

CFR 1910. 134, and/or Canadian

Standards Associations (CSA).

DISCLAIMER OF WARRANTIES

In the event the compressor/pump

is used for the purpose of breathing

air application and proper in-line

safety and alarm equipment is not

simultaneously used, existing war-

ranties are void, and Powerex dis-

claims any liability whatsoever for

any loss, personal injury or damage.

DANGER

Teflon® rings reduce wear and provide

self lubrication. Piston rings should be

replaced every 10,000 hours of opera-

tion (See Figure 12).

BEARING REGREASE

The wrist pin bearings of the OPS and

OPT oilless compressors are needle bear-

ings protected by two outer lip seals.

This needle bearing becomes impacted

and requires regreasing at 5,000 hours

(See Figure 15).

BEARING SEALS

The wrist pin bearing lip seals prevent

the lubricating grease from leaking

from the bearing area. The two lip seals

on each connecting rod require replace-

ment every 10,000 hours (See Figure 16-

22 or page 9).

Installation

INSTALLATION SITE

1. The oilless compressor must be locat-

ed in a clean, well lit and well venti-

lated area.

2. The area should be free of excessive

dust, toxic or flammable gases and

moisture.

3. Never install the compressor where

the ambient temperature is higher

than 105

F or where humidity is high.

IN258603AV 9/04

OPS 010

1 145 3.6 625 1 2.56 2.56 11.2 1 GR-A 28

1.5 5.3 885

OPS 030

145

6.6 845

2 2.56 2.36 13.8 1 GR-B 53

3 10.1 1115

OPT 050 5 145 17.2 860 2 4.31 x 2.95 3.35 16.9 2 GR-B 110

OPT 100

7.5

145

27.5 855

3 3.54 x 2.95 3.35 18.3 2 GR-B 165

10 35.0 1090

OPT 150 15 145 47.0 1140 3 4.13 x 2.95 3.35 19.6 2 GR-B 170

Max. SCFM @ No. of Flywheel Weight

Model HP PSIG 100 PSIG RPM Cyl. Bore Stroke O.D. Drive (lbs.)

Specifications

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Comments to this Manuals

No comments

Powerex Medical Packing System MPQ User Manual Page 8

Comments to this Manuals